| Most common failures | No# failures |
|---|
| Brakes imbalanced across an axle | 11 |
| Registration plate lamp issues | 10 |
| Brake pipe excessively corroded | 8 |
| Windscreen wiper does not clear the windscreen effectively | 7 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 6 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 6 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Stop lamp not working |1.2.1b| | 4 |
| Headlamp aim out of alignment | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Headlamp not working on main beam |1.7.5a| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Service brake: efficiency below requirements |3.7.C.1a| | 3 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
| Rear brake binding | 3 |
| Horn not working |1.6.2a| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Windscreen washer not working | 2 |
| Exhaust system not adequately supported rear exhaust mounting broken |7.1.1| | 2 |
| Nearside Rear Braking system leaking |3.6.A.1| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Battery insecure |1.9.1| | 2 |
| Registration plate issues | 2 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
| Brake pedal spongy |3.3.B.1b| | 2 |
| Windscreen washer control missing |8.2.1a| | 2 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Exhaust system not adequately supported |7.1.1| | 2 |
| Stop lamp not working |1.2.1b| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Nearside Rear front brake binding |3.7.B.1| | 1 |
| Offside Rear front brake binding |3.7.B.1| | 1 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Rear Brake hose twisted |3.6.B.4c| | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake reservoir fluid level decreases after several pedal applications |3.3.C.1| | 1 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake performance not tested Not tested because all 4 wheels binding |1.2.1 |g|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Shock absorber insecure upper bolt loose |2.7.2b| | 1 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Offside Front Front suspension has a loose unit in the upper support bearing assembly |2.5.B.3b| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure |3.1.4b| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt steering box arm ball joint |2.2.C.1c| | 1 |
| Brake pipe leaking brake fluid reservoir to master cylinder |temp fix| |3.6.A.1| | 1 |
| Nearside Rear Service brake grabbing severely binding badly and fluid leaking at back plate |3.7.C.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Rear reflector missing |1.5.1a| | 1 |
| Offside Rear reflector missing |1.5.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Brake hose leaking |3.6.A.1| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel hub oil seal leaking suspect contamination (1.2.1 (a) (i)) | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Direction indicators not working |1.4.A.2c| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Rear reflector not red in colour |1.5.1d| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Rear Drag link end ball joint dust cover missing |2.2.C.1c| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Brake valve insecurely mounted |3.6.A.2a| | 1 |
| Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases manifold |6.1.2 |a|| | 1 |
| Front brake application uneven | 1 |
| Brake hose damaged | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |