Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Registration plate lamp issues | 10 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Horn not working |1.6.2a| | 3 |
Rear parking brake recording little or no effort | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Registration plate issues | 3 |
Brakes imbalanced across an axle | 2 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Steering pivot point has excessive play |2.2.B.1g| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Side repeater not working |1.4.A.2c| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Brake pipe excessively corroded | 2 |
Rear brake binding | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Brake hose excessively deteriorated | 2 |
All position lamps not working |1.1.A.3b| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded end sill wing area |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded end sill wing area |2.4.A.3| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Horn emits two or more alternating tones |1.6.2d| | 1 |
Offside Rear Brake hose stretched |3.6.B.4c| | 1 |
Nearside Front brake caliper securing device missing |3.5.1j| | 1 |
Nearside Rear brake caliper securing device missing |3.5.1j| | 1 |
Offside brake caliper securing device missing |3.5.1j| | 1 |
Offside Rear brake caliper securing device missing |3.5.1j| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear Fuel pipe leaking |7.2.3| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Front Braking system leaking |3.6.A.1| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Offside Front Front position lamp|s| not working both |1.1.A.3b| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Brake hose has insufficient room to move | 1 |
Offside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded Leaf spring rear mount |2.4.A.3| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Windscreen has damage | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Fuel pipe insecure |7.2.1| | 1 |
Rear brake application uneven | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside front brake juddering severely |3.7.A.2b| | 1 |
Offside front brake juddering severely |3.7.A.2b| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Position lamp switch faulty |1.1.A.1| | 1 |
Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Inner Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Leaf spring anchor bracket nut missing |2.4.B.6c| | 1 |
Offside Rear Leaf spring anchor bracket loose |2.4.B.6a| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |