MOT History from tests of petrol LANCIA BETAs year 1986

Review the list of common LANCIA BETA failures below or to perform a specific mot history check on your LANCIA then use our popular KnowYourCar service

mot history

Pass percent:67.74%

(The average a petrol LANCIA BETA year 1986 passes without issue)

Based on:31 MOT Tests

Most common failures	No# failures
Rear fog lamp tell tale not working \|1.3.1b\|	2
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Parking brake efficiency below requirements \|1.4.2 \|a\| \|i\|\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Indicator switch faulty \|1.4.A.1\|	1
Stop lamp remains on when the brakes are released	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
front brake binding \|3.7.B.1\|	1
Rear brake binding	1
Windscreen wiper does not clear the windscreen effectively	1
Nearside Rear fog lamp not working \|1.3.2b\|	1
Offside Steering rack gaiter split \|2.2.D.2d\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance \|1.4.A.2e\|	1
Horn control insecure \|1.6.1\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front front brake grabbing severely \|3.7.A.2b\|	1
Offside Front front brake grabbing severely \|3.7.A.2b\|	1
Nearside Front Side repeater not working \|1.4.A.2c\|	1
Registration plate lamp issues	1
Offside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake valve has an excessive discharge of oil \|3.6.E.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear fog lamp tell tale not working \|1.3.1b\|	2
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Parking brake efficiency below requirements \|1.4.2 \|a\| \|i\|\|	1
Rear fog lamp not working \|1.3.2b\|	1
Offside Indicator switch faulty \|1.4.A.1\|	1
Stop lamp remains on when the brakes are released	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
front brake binding \|3.7.B.1\|	1
Rear brake binding	1
Windscreen wiper does not clear the windscreen effectively	1
Nearside Rear fog lamp not working \|1.3.2b\|	1
Offside Steering rack gaiter split \|2.2.D.2d\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance \|1.4.A.2e\|	1
Horn control insecure \|1.6.1\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front front brake grabbing severely \|3.7.A.2b\|	1
Offside Front front brake grabbing severely \|3.7.A.2b\|	1
Nearside Front Side repeater not working \|1.4.A.2c\|	1
Registration plate lamp issues	1
Offside Outer Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake valve has an excessive discharge of oil \|3.6.E.1\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1

MOT History from tests of petrol LANCIA BETAs year 1986

Find us on Facebook