Most common failures | No# failures |
---|
Headlamp aim out of alignment | 27 |
Registration plate issues | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Horn not working |1.7.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Riders seat insecure |6.2.1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Built up wheel has a bolt/s missing |4.2.1c| | 2 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Centre Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake back plate|s| insecure |3.2.A1j| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front suspension assembly component missing nut missing |2.3.1| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Outer Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Lower Front suspension assembly component loose |2.3.1| | 1 |
Steering linkage has excessive free play handlebars turn without wheel when in rolers loose to forks |2.2.2| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Decelerometer brake test indicates a severely juddering brake |3.3.E1e| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
An item not tested |Manual| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Throttle operating incorrectly sticking open |6.2.1f| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Brake component is fractured cable mount |3.1.5| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Front Front wheel insecure |4.2.3b| | 1 |
Centre Front Lower Horn not working |1.7.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Upper Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |