Most common failures | No# failures |
---|
Headlamp aim out of alignment | 27 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
Registration plate issues | 15 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Horn not working |1.7.3a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Riders seat insecure |6.2.1a| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp aim not tested |1.6| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Direction indicators not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Brake master cylinder insecure |1.1.10 |c|| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Front wheel spindle loose |2.3.5a| | 1 |
Rear Fuel cap sealing washer torn |7.2.2c| | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
Offside Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Central Rear Upper Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake linkage has abnormal movement due to excessive wear Front Brake Adjustment nut/ thread stripped. |3.2.A1i| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Offside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Centre Front Upper Headlamp insecure |1.2.3b| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen pattern is "spot light" (4.1.2 (a)) | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |