| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 21 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Registration plate issues | 7 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Front suspension assembly component loose |2.3.1| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Horn not working |1.7.3a| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Fuel pipe leaking |7.2.1a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Front suspension assembly component cracked |2.3.1| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Leg shield so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Rear wheel has a loose wheel stud|s| |4.2.3a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Brake performance not tested |3.3| | 1 |
| Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised left lock |2.2.1b| | 1 |
| Nearside Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| An item not tested |Manual| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |