Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Front suspension assembly component missing |2.3.1| | 1 |
Offside Front suspension assembly component missing |2.3.1| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Rear Lower Brake pedal insecure |3.1.2a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Built up wheel has a bolt/s missing |4.2.1c| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Exhaust mounting does not fully support the exhaust system Both rear Colton reel mount s lose |7.1.1.c| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Horn control defective |1.7.2a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Front Brake drum|s| insecure |3.2.A1g| | 1 |
Central Front Upper Steering operation impeded by a leg shield |2.1.4 |e|| | 1 |
Central Front Upper Steering linkage locking device ineffective |2.1.3 |d|| | 1 |
Central Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Registration plate lamp issues | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake caliper damaged and braking performance affected (1.1.16 (a) (ii)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Front wheel spindle securing nut(s) loose (2.3.5a) | 1 |
Front Front wheel spindle loose (2.3.5a) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |