| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Drive chain excessively loose |6.2.1d| | 16 |
| Registration plate issues | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Horn not working |1.7.3a| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Drive chain worn to excess |6.2.1e| | 8 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 5 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 5 |
| Handlebar deformed |2.1.1b| | 5 |
| Headlamp aim not tested |1.6| | 5 |
| Front Wheel spoke excessively loose |4.2.1b| | 5 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 5 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear Brake locking device insecure |3.2.A1e| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Rear Drive chain excessively loose |6.2.1d| | 4 |
| Rear Brake locking device missing |3.2.A1e| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
| Headlamp insecure |1.2.3b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Brake locking device missing |3.2.A1e| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Fuel system component insecure |7.2.1b| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Direction indicator flashing more than 120 times per minute all four |1.5.1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin missing from rear brake torque arm |6.2.1h| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link clip fitted in wrong direction |6.2.1h| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Steering lock stop maladjusted |2.1.3| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Brake pipe excessively chafed |3.2.B2a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Rear reflector on motorcycle missing |1.4.1| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Front Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Offside Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Brake component is fractured rear brake cable |3.1.5| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Lower Fork yoke deformed |2.1.1b| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Brake locking device missing rear torque arm split pin missing |3.2.A1e| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Brake locking device insecure rear brake cam lever insecure |3.2.A1e| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front An item not tested |Manual| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Rear Drive chain sprocket worn to excess sprocket no nuts holding in place |6.2.1e| | 1 |
| Headlamp aim headlamp deteriorated and function impaired head light dirty glass |1.2.3a| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Wheel modified significantly reducing the original strength |4.2.1a| | 1 |
| Wheel inadequatly repaired significantly reducing the original strength |4.2.1a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Centre Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Sprocket Bolts Loose |6.2.1h| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Steering lock stop missing |2.1.3| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Roller brake test indicates a binding brake Pads not fitted correctly |3.3.A1a| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Brake hose damaged | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front Headlamp switch insecure |1.2.4| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Motorcycle structure adversely modified Rear number plate mount fouling rear wheel |6.1.1b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp Affected by indicators |1.1.3b| | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake disc insecure securing nuts insecure (1.1.14 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Brake rod insecure no locking device (1.1.15 (c)) | 1 |
| Brake component inadequately mounted rear brake torque arm insecure & missing locking device (1.1.21 (c)) | 1 |
| Nearside Front Footrest insecure missing split pin (6.2.12 (a)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Headlamp lens seriously defective lens incorrectly fitted (4.1.1 (b) (ii)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |