>

MOT History from tests of petrol KYMCO SUPERs year 2013

Review the list of common KYMCO SUPER failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history
Pass percent:73.04%
(The average a petrol KYMCO SUPER year 2013 passes without issue)
Based on:345 MOT Tests
Most common failuresNo# failures
Registration plate issues7
Horn not working (7.7 (a) (ii))7
Headlamp aim out of alignment5
Front Brake excessively binding (1.2.1 (f))5
Horn not working |1.7.3a|5
Steering headbearing has excessive free play |2.2.2|4
Rear reflector on motorcycle obscured |1.4.2b|4
Rear Brake lever has inadequate reserve travel |3.1.3b|4
Rear Stop lamp not working (4.3.1 (a) (ii))3
Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Registration plate lamp issues3
Front Roller brake test indicates a binding brake |3.3.A1a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Riders seat insecure |6.2.5 |a| |ii||2
Offside Rear Footrest missing |6.2.1a|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Throttle operating incorrectly (6.2.7 (a) (i))2
All direction indicators not working (4.4.1 (a) (ii))2
All position lamps not working (4.2.1 (a))2
Stop lamp not working (4.3.1 (a) (ii))2
Exhaust is leaking and excessively noisey |7.1.1b|2
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||2
Rear suspension bearing has excessive free play |2.4.A2a|i||2
Horn not working (7.7 (a))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Headlamp light intensity severely reduced (4.1.4 (a))2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Brake excessively binding (1.2.1 (f))1
Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))1
Rear Brake lever mounting insecure |3.1.2a|1
Horn not working due to flat battery |7.7 |a| |ii||1
All direction indicators not working due to flat battery |4.4.1 |a| |ii||1
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Exhaust excessively deteriorated |7.1.1a|1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Nearside Rear Footrest missing |6.2.1a|1
Rear reflector missing |4.8.2 |a| |ii||1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii||1
Headlamp aim not tested |1.6|1
Rear reflector on motorcycle obscured covered by l plate |1.4.2b|1
Offside Front Direction indicator likely to become detached |4.4.1 |c| |ii||1
Riders seat with a defective supporting structure |6.2.5 |a| |i||1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Rear reflector missing (4.8.2 (a) (ii))1
Nearside Front Brake lever pivot has excessive free play (1.1.1 (b))1
Front Position lamp not working |4.2.1 |a||1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear reflector missing obscured by L plate (4.8.2 (a) (ii))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii))1
Riders seat insecure |6.2.1a|1
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Brake excessively binding Front |1.2.1 |f||1
Brake excessively binding Front (1.2.1 (f))1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Brake lever pivots excessively worn |3.1.3a|1
Horn not working |7.7 |a| |ii||1
Nearside Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Floor brake test indicates a binding brake front brake binding on floor test |3.3.C2c|1
Nearside Rear Direction indicators not working |1.5.1c|1
Headlamp incorrect colour blue tinted |1.2.1|1
Rear Rear reflector on motorcycle obscured |1.4.2b|1
Central Rear Upper Rear reflector missing (4.8.2 (a) (ii))1
Central Upper Riders seat insecure (6.2.5 (a) (ii))1
Rear position lamp incorrect colour |1.1.2b|1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Front suspension assembly excessive wear or free play in a front suspension component Head stock |2.3.4|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear reflector on motorcycle missing |1.4.1|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Headlamp switch faulty |1.2.4|1
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Rear Lower Exhaust excessively deteriorated heat shield loos |7.1.1a|1
Offside Direction indicator not working (4.4.1 (a) (ii))1
Stop lamp not working NOT WORKING WHEN REAR BRAKE SWITCH APPLIED (4.3.1 (a) (ii))1
Steering operation impeded by a fairing (2.1.4 (e))1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Rear Footrest insecure |6.2.1a|1
Front All direction indicators not working (4.4.1 (a) (ii))1
Headlamp aim not tested |4.1.2 |b||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Offside Front Brake lagging in operation Lever cannot be applied smoothly notchy in operation |1.2.1 |d||1
Stop lamp not working FROM FRONT CONTROL (4.3.1 (a) (ii))1
Front Brake lever insecure (1.1.2 (e) (i))1
Headlamp light intensity severely reduced |4.1.4 |a||1
Stop lamp remains on when the brakes are released1
Headlamp lens seriously defective (4.1.1 (b) (ii))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Exhaust is leaking and excessively noisey temporary repair made |7.1.1b|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Wheel alignment incorrect which adversely affects the steering steering off line |2.5.1|1
Front Decelerometer brake test indicates a binding brake |3.3.E1d|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front position lamp damaged and function impaired |1.1.1b|1
Nearside Direction indicators not working |1.5.1c|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy