Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Rear reflector on motorcycle missing |1.4.1| | 21 |
Steering headbearing has excessive free play |2.2.2| | 12 |
Registration plate issues | 10 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear reflector on motorcycle obscured |1.4.1| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Riders seat insecure |6.2.1a| | 6 |
Horn not working |1.7.3a| | 6 |
Handlebar mounting clamp bolt loose |2.1.1a| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Front position lamp incorrect colour |1.1.2a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Handlebar mounting clamp loose |2.1.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn not working (7.7 (a)) | 1 |
Rear reflector on motorcycle missing covered by L plate |1.4.1| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Steering operation restricted in free movement from lock to lock STIFF AND ROUGH STEERING |2.1.4 |c|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Upper Exhaust mounting missing |7.1.1c| | 1 |
Inner Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking mirror is in danger of affecting front brake operation. |6.1.1c| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Centre Rear Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front Indicator switch insecure |1.5.4| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake lever attachment screws missing |3.1.2b| | 1 |