Most common failures | No# failures |
---|
Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
Headlamp aim out of alignment | 14 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear reflector on motorcycle obscured |1.4.1| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Direction indicators not working |1.5.1c| | 3 |
Rear Brake lever insecure |3.1.2a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Registration plate issues | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front suspension assembly component excessively bent |2.3.1| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Brake hose damaged | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Fairing insecure and likely to impede the steering |2.1.2e| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear Fuel system component leaking |7.2.1a| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear Indicator tell tale not functioning |1.5.2| | 1 |
Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Front Headlamp switch insecure |1.2.4| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Brake caliper|s| insecure |3.2.A1j| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake component is excessively corroded |3.1.5| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |