>

MOT History from tests of petrol KYMCO STRYKERs year 2003

Review the list of common KYMCO STRYKER failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history
Pass percent:56.52%
(The average a petrol KYMCO STRYKER year 2003 passes without issue)
Based on:115 MOT Tests
Most common failuresNo# failures
Drive chain worn to excess |6.2.1e|10
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Headlamp aim out of alignment6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Rear shock absorber has inadequate damping effect. |2.4.A.3b|5
Rear reflector on motorcycle missing |1.4.1|5
Rear Drive chain sprocket worn to excess |6.2.1e|4
Headlamp main beam affected by the operation of another lamp |1.2.2c|4
Exhaust is leaking and excessively noisey |7.1.1b|3
Headlamp aim beam image kick up to the offside |1.6|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Horn not working |1.7.3a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Rear Drive chain sprocket carrier worn to excess |6.2.1e|2
Handlebar deformed |2.1.1b|2
Front Direction indicator affected by the operation of another lamp |1.5.1c|2
Horn not loud enough to be heard by another road user |1.7.3a|2
Front Drive chain sprocket worn to excess |6.2.1e|2
Direction indicator affected by the operation of another lamp |1.5.1c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Direction indicators not working |1.5.1c|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Drive chain excessively loose |6.2.1d|1
Upper Steering lock stop ineffective |2.1.3|1
Steering headbearing has excessive free play |2.2.2|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Rear position lamp damaged and function impaired |1.1.1b|1
Rear position lamp incorrect colour |1.1.2b|1
Nearside Front Footrest insecure |6.2.1a|1
Horn control defective |1.7.2a|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Rear reflector on motorcycle obscured |1.4.1|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Front wheel bearings have excessive free play |2.3.5b|1
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Rear Drive chain worn to excess |6.2.1e|1
Nearside Rear Drive chain sprocket worn to excess |6.2.1e|1
Offside Rear Direction indicator not working |1.5.1c|1
Headlamp insecure |1.2.3b|1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Brake linkage has abnormal movement due to maladjustment |3.2.A1i|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Drive chain excessively tight (6.1.7 (k) (i))1
Throttle operating incorrectly Throttle accelerates and decelerates on its own. (6.2.7 (a) (i))1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Brake locking device missing |3.2.A1e|1
Nearside Rear Direction indicators not working |1.5.1c|1
Drive chain sprocket worn to excess |6.2.1e|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Offside Rear Brake locking device missing |3.2.A1e|1
Rear Drive chain excessively loose (6.1.7 (c) (i))1
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Stop lamp remains on when the brakes are released1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Rear Direction indicator not working |1.5.1c|1
Stop lamp affected by the operation of the horn |1.3.2|1
Nearside Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Front Footrest insecure |6.2.1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear Direction indicator not working |1.5.1c|1
Headlamp aim not tested |1.6|1
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii||1
Nearside Rear Rear reflector missing |4.8.2 |a| |ii||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Rear Drive chain excessively loose |6.1.7 |c| |i||1
Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii||1
Rear Drive chain sprocket so worn it is likely to fail x 2 off |6.1.7 |c| |ii||1
Rear Drive chain worn to excess |6.1.7 |c| |i||1
Nearside Drive chain sprocket worn to excess |6.2.1e|1
Drive chain so loose it is likely to fail |6.1.7 |c| |ii||1
Front Direction indicator obviously incorrectly positioned |4.4.3 |a||1
Indicator tell tale not functioning |1.5.2|1
Offside Front Handlebar mounting clamp bolt loose bolt to yolk bent |2.1.1a|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket |6.2.1h|1
Rear suspension movement is excessively stiff |2.4.A.3b|1
Drive chain excessively loose |6.2.1d|1
Horn is not a constant note |1.7.3c|1
Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Headlamp dipped beam affected by the operation of the horn |1.2.2c|1
Headlamp main beam affected by the operation of the horn |1.2.2c|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Brake locking device missing |3.2.A1e|1
Throttle operating incorrectly |6.2.1f|1
Nearside Steering lock stop ineffective |2.1.3|1
Rear Stop lamp does not emit a steady light |1.3.1b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy