>

MOT History from tests of petrol KYMCO PULSARs year 2010

Review the list of common KYMCO PULSAR failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history
Pass percent:63.98%
(The average a petrol KYMCO PULSAR year 2010 passes without issue)
Based on:422 MOT Tests
Most common failuresNo# failures
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|27
Headlamp aim out of alignment20
Drive chain excessively loose |6.2.1d|18
Drive chain worn to excess |6.2.1e|11
Rear Drive chain sprocket worn to excess |6.2.1e|11
Rear reflector on motorcycle missing |1.4.1|10
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||9
Steering headbearing has excessive free play |2.2.2|8
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Offside Rear Footrest missing |6.2.1a|5
Drive chain excessively tight |6.2.1d|5
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Rear Footrest missing |6.2.1a|4
Rear Stop lamp not working (4.3.1 (a) (ii))4
Rear Stop lamp not working |4.3.1 |a| |ii||3
Rear Roller brake test indicates a sticking brake |3.3.A1a|3
Front Drive chain sprocket worn to excess |6.2.1e|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Stop lamp remains on when the brakes are released3
Drive chain excessively loose (6.1.7 (c) (i))3
Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Rear suspension bush has excessive free play |2.4.A2a|i||3
Front Position lamp not working |4.2.1 |a||3
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Registration plate issues2
Headlamp insecure |1.2.3b|2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Horn not working |1.7.3a|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Drive chain sprocket worn to excess |6.2.1e|2
Rear wheel bearings are excessively tight |2.4.A.2c|2
Nearside Handlebar mounting clamp bolt loose |2.1.1a|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Offside Front Direction indicator not working |4.4.1 |a| |ii||2
Offside Front Direction indicators not working |1.5.1c|2
Throttle operating incorrectly |6.2.1f|2
Brake locking device missing |3.2.A1e|2
Drive chain sprocket carrier worn to excess |6.2.1e|2
Offside Indicator tell tale not functioning |1.5.2|2
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear reflector on motorcycle obscured |1.4.1|2
Rear Position lamp not working (4.2.1 (a))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Front All direction indicators obviously incorrectly positioned 130mm apart must min 240mm apart (4.4.3 (a))1
Front Position lamp missing No side light fitted (4.2.1 (a))1
Rear Suspension arm mounting has an unsafe modification Swing arm fouling on exhaust not allowing full movement (5.3.3 (c) (i))1
Front Headlamp aim so that beam "kick up" is not visible on the screen Headlight has no pattern (4.1.2 (a))1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Stop lamp not working (4.3.1 (a) (ii))1
Drive chain excessively tight (6.1.7 (k) (i))1
Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i))1
Offside Front Footrest insecure (6.2.12 (a))1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Front Brake excessively binding |1.2.1 |f||1
Fuel pipe leaking chaffed thro on engine |7.2.1a|1
Centre Front Headlamp aim beam image kick up to the offside no beam pattern |1.6|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Rear position lamp obscured more than 50% |1.1.1d|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Brake pedal cannot be applied smoothly |3.1.3d|1
Rear Decelerometer brake test indicates a binding brake |3.3.E1d|1
Stop lamp remains on when the brake is released foot |1.3.1e|1
Brake pedal is inoperative |3.1.3c|1
Brake reaction bracket insecure |3.2.A1j|1
Brake linkage has abnormal movement due to maladjustment |3.2.A1i|1
Rear Drive chain sprocket carrier worn to excess |6.2.1e|1
Offside Rear Footrest insecure |6.2.1a|1
Nearside Rear Footrest insecure |6.2.1a|1
Nearside Rear Direction indicators not working |1.5.1c|1
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii||1
Rear reflector missing |4.8.2 |a| |ii||1
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii||1
Front Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii||1
Front Brake lever insecure |1.1.2 |e| |i||1
Rear Suspension arm mounting modified so the suspension is likely to fail other components |5.3.3 |c| |ii||1
Nearside Rear Lower Shock absorber has an excessively worn bush |5.3.2 |c||1
Offside Rear Lower Shock absorber has an excessively worn bush |5.3.2 |c||1
Rear Brake back plate insecure |1.1.14 |d||1
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Headlamp light source and lamp not compatible wrong pattern (4.1.4 (c))1
Rear reflector missing not visable (4.8.2 (a) (ii))1
Front Fork yoke in such a condition that steering control is adversely affected excessive movement top and bottom yoke bearings (2.2.2 (d) (ii))1
Position lamp not working (4.2.1 (a))1
Nearside Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii||1
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Front Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Offside Handlebar mounting clamp bolt loose |2.1.1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Steering movement excessively rough with the wheel raised |2.2.1b|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d||1
Nearside Front Direction indicators not working |1.5.1c|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Drive chain fouling another component |6.2.1d|1
Rear Brake excessively binding (1.2.1 (f))1
Rear reflector missing obscured by l plate (4.8.2 (a) (ii))1
Front Brake grabbing severely (1.2.1 (c))1
Rear Wheel bearing has excessive play sprocket carrier (5.1.3 (a) (i))1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Drive chain excessively loose |6.2.1d|1
Footrest missing |6.2.1a|1
Stop lamp not working |4.3.1 |a| |ii||1
Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i||1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Stop lamp does not illuminate immediately a brake applies foot pedal swith fault |1.3.1a|1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Exhaust system insecure (6.1.2 (a))1
Nearside Indicator tell tale not functioning |1.5.2|1
Nearside Footrest missing |6.2.1a|1
Nearside Rear Footrest missing |6.2.1a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Brake locking device missing |3.2.A1e|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Brake hose damaged1
Rear Brake pedal cannot be released smoothly |3.1.3d|1
Stop lamp remains on when the brake is released rear brake |1.3.1e|1
Throttle operating incorrectly To Much Free Play (6.2.7 (a) (i))1
Drive chain worn to excess (6.1.7 (c) (i))1
Brake pedal has insufficient reserve travel (1.1.2 (a))1
Headlamp light source and lamp not compatible |4.1.4 |c||1
Offside Rear Footrest missing |6.2.12 |a||1
Handlebar mounting clamp bolt loose |2.1.1a|1
Fuel cap sealing washer torn |7.2.2c|1
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Drive chain worn to excess tight spot in chain |6.2.1e|1
Offside Front Handlebar deformed clip on bent? |2.1.1b|1
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||1
Headlamp reflector seriously defective |4.1.1 |b| |ii||1
Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Rear Direction indicator not working |1.5.1c|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Brake hose excessively deteriorated1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Rear Rear position lamp insecure |1.1.1c|1
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Front position lamp adversely affected by the operation of the horn |1.1.3b|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Position lamp switch faulty |1.1.4a|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Brake lever insecure |3.1.2a|1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Nearside Front Footrest insecure |6.2.12 |a||1
Horn not working (7.7 (a) (ii))1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Brake pedal cannot be released smoothly causing brake light to stay on |3.1.3d|1
Rear Drive chain sprocket carrier worn to excess sprocket carrier and cush drive excessive play |6.2.1e|1
Front Brake hose damaged and likely to fail |1.1.12 |a||1
Wheel hub excessively worn rear sprocket carrier bearing worn |5.2.1 |b| |i||1
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Nearside Handlebar retaining device loose (2.2.1 (b) (i))1
Stop lamp remains on when the brake is released |1.3.1e|1
Front wheel bearings have excessive free play |2.3.5b|1
Brake locking device insecure |3.2.A1e|1
Horn not working (7.7 (a))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear reflector missing (4.8.2 (a) (ii))1
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))1
Rear All direction indicators obviously incorrectly positioned built in with position light (4.4.3 (a))1
Front Exhaust system insecure exhaust to head clamp broken (6.1.2 (a))1
Front Motorcycle structure excessively damaged |6.1.1a|1
Front Position lamp not working (4.2.1 (a))1
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))1
Rear Rear reflector missing under l plate (4.8.2 (a) (ii))1
Direction indicators not working |1.5.1c|1
Rear reflector on motorcycle obscured |1.4.2b|1
Rear suspension bush has excessive free play swingarm bushes |2.4.A2a|i||1
Front Brake caliper|s| insecure |3.2.A1j|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Offside Rear Footrest missing (6.2.12 (a))1
Rear Drive chain sprocket excessively loose cush drive (6.1.7 (c) (i))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Nearside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Brake component has an inadequate repair Front calliper bolt fouling disc |3.1.5|1
Chain guard insecure |6.2.1c|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii))1
Stop lamp affected by the operation of another lamp |1.3.2|1
Stop lamp missing |1.3.3a|1
Offside Rear Direction indicator not working |1.5.1c|1
Centre Rear reflector on motorcycle missing |1.4.1|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy