>

MOT History from tests of petrol KYMCO HIPSTERs year 2005

Review the list of common KYMCO HIPSTER failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history
Pass percent:63.58%
(The average a petrol KYMCO HIPSTER year 2005 passes without issue)
Based on:162 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment20
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Horn not working |1.7.3a|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Drive chain excessively loose |6.2.1d|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Direction indicators affected by the operation of another lamp |1.5.1c|3
Registration plate issues2
Nearside Rear Footrest missing |6.2.1a|2
Offside Rear Footrest missing |6.2.1a|2
Rear Brake locking device missing |3.2.A1e|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Steering headbearing has excessive free play |2.2.2|2
Rear reflector on motorcycle missing |1.4.1|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Brake pedal has inadequate reserve travel |3.1.3b|2
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Drive chain worn to excess |6.2.1e|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Drive chain sprocket carrier worn to excess |6.2.1e|1
Riders seat insecure |6.2.1a|1
Brake hose damaged1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Wheel spoke cracked. |4.2.1b|1
Rear Wheel spoke excessively loose |4.2.1b|1
Nearside Direction indicator not working |1.5.1c|1
Rear Wheel spoke missing |4.2.1b|1
Front Direction indicator not working |1.5.1c|1
Rear Direction indicator not working |1.5.1c|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Rear reflector on motorcycle obscured |1.4.2b|1
Headlamp dipped beam affected by the operation of the horn |1.2.2c|1
Headlamp main beam affected by the operation of the horn |1.2.2c|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Direction indicator affected by the operation of another lamp |1.5.1c|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Front Horn not working |1.7.3a|1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Direction indicators affected by the operation of another lamp all |1.5.1c|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Front Front mudguard insecure |2.3.7|1
All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Drive chain excessively tight |6.2.1d|1
Horn not working |7.7 |a| |ii||1
Front Brake disc contaminated |1.1.14 |b||1
All direction indicators not working |4.4.1 |a| |ii||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Registration plate lamp issues1
Stop lamp not working |4.3.1 |a| |ii||1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Rear Brake cable excessively worn |1.1.15 |b||1
Brake performance not tested not tested due to contaminated front brake disc |1.2.1 |g||1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Nearside Front Direction indicator not working |1.5.1c|1
Offside Rear Lower Drive chain worn to excess |6.2.1e|1
Offside Rear Lower Drive chain sprocket worn to excess |6.2.1e|1
Centre Rear Lower Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Front Front suspension fouling which affects the movement of the front suspension. l plate bolted to suspension |2.3.6a|1
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Lower Drive chain worn to excess |6.2.1e|1
Nearside Rear Footrest insecure |6.2.1a|1
Offside Rear Footrest insecure |6.2.1a|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicators flashing more than 120 times per minute |1.5.1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Brake reaction bracket insecure |3.2.A1j|1
Direction indicator missing |1.5.1a|1
Indicator tell tale not functioning |1.5.2|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Headlamp aim not tested |1.6|1
Rear suspension component loose |2.4.A.1a|1
Rear suspension component seized |2.4A2a|ii||1
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear suspension movement is excessively stiff |2.4.A.3b|1
Brake locking device missing |3.2.A1e|1
Rear Footrest missing |6.2.1a|1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Headlamp deteriorated and function impaired |1.2.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy