MOT History from tests of petrol KYMCO EGOs year 2003

Review the list of common KYMCO EGO failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history

Pass percent:80.11%

(The average a petrol KYMCO EGO year 2003 passes without issue)

Based on:181 MOT Tests

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	6
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Horn not working \|1.7.3a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Headlamp aim out of alignment	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Exhaust excessively deteriorated \|7.1.1a\|	1
Front Riders seat insecure \|6.2.1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Motorcycle structure joining/attachment plate or fastening insecure mud guard \|6.1.1 \|b\| \|i\|\|	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front position lamp incorrect colour \|1.1.2a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Direction indicator not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim beam image kick up to the offside \|1.6\|	6
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Horn not working \|1.7.3a\|	2
Rear reflector on motorcycle missing \|1.4.1\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Headlamp aim out of alignment	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Exhaust excessively deteriorated \|7.1.1a\|	1
Front Riders seat insecure \|6.2.1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Rear Motorcycle structure joining/attachment plate or fastening insecure mud guard \|6.1.1 \|b\| \|i\|\|	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front position lamp incorrect colour \|1.1.2a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Direction indicator not working \|1.5.1c\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1

MOT History from tests of petrol KYMCO EGOs year 2003

Find us on Facebook