MOT History from tests of petrol KYMCO AGILITYs year 2007

Review the list of common KYMCO AGILITY failures below or to perform a specific mot history check on your KYMCO then use our popular KnowYourCar service

mot history

Pass percent:78.27%

(The average a petrol KYMCO AGILITY year 2007 passes without issue)

Based on:1,868 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	64
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	44
Front Roller brake test indicates a binding brake \|3.3.A1a\|	27
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	24
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	21
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	15
Exhaust is leaking and excessively noisey \|7.1.1b\|	15
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	13
Registration plate issues	12
Riders seat insecure \|6.2.1a\|	10
Headlamp aim beam image kick up to the offside \|1.6\|	9
Horn not working \|1.7.3a\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	9
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Exhaust excessively deteriorated \|7.1.1a\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Front Brake lever cannot be applied smoothly \|3.1.3d\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	5
Headlamp aim not tested \|1.6\|	5
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	5
Front Steering headbearing has excessive free play \|2.2.2\|	5
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Floor brake test indicates a binding brake \|3.3.C2c\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Rear Footrest missing \|6.2.1a\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Headlamp switch insecure \|1.2.4\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Front suspension assembly component excessively bent \|2.3.1\|	4
Headlamp not working on main beam (4.1.1 (a) (ii))	4
Exhaust has a major leak of exhaust gases (6.1.2 (a))	4
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Horn not loud enough to be heard by another road user \|1.7.3a\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Nearside Rear Direction indicator not working \|1.5.1c\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Position lamp switch insecure \|1.1.4b\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Steering headbearing has excessive free play (2.2.2)	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	2
Fuel cap sealing washer torn \|7.2.2c\|	2
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front position lamp insecure \|1.1.1c\|	2
Rear Brake lever pivots excessively worn \|3.1.3a\|	2
Brake hose excessively deteriorated	2
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Brake hose damaged	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Rear Exhaust excessively deteriorated \|7.1.1a\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Rear Brake lever insecure \|3.1.2a\|	2
Rear Brake lever mounting cracked \|3.1.2c\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Rear position lamp insecure \|1.1.1c\|	2
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Nearside Steering lock stop missing \|2.1.3\|	2
Offside Steering lock stop missing \|2.1.3\|	2
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Front Brake excessively binding \|1.2.1 \|f\|\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Stop lamp remains on when the brakes are released	2
Direction indicators not working \|1.5.1c\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front Headlamp missing (4.1.1 (a) (ii))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	64
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	44
Front Roller brake test indicates a binding brake \|3.3.A1a\|	27
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	24
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	21
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	15
Steering headbearing has excessive free play \|2.2.2\|	15
Exhaust is leaking and excessively noisey \|7.1.1b\|	15
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	13
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	13
Registration plate issues	12
Riders seat insecure \|6.2.1a\|	10
Headlamp aim beam image kick up to the offside \|1.6\|	9
Horn not working \|1.7.3a\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	9
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Exhaust excessively deteriorated \|7.1.1a\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Front Brake lever cannot be applied smoothly \|3.1.3d\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	5
Headlamp aim not tested \|1.6\|	5
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	5
Front Steering headbearing has excessive free play \|2.2.2\|	5
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Floor brake test indicates a binding brake \|3.3.C2c\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Rear Footrest missing \|6.2.1a\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Headlamp switch insecure \|1.2.4\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Front suspension assembly component excessively bent \|2.3.1\|	4
Headlamp not working on main beam (4.1.1 (a) (ii))	4
Exhaust has a major leak of exhaust gases (6.1.2 (a))	4
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Horn not loud enough to be heard by another road user \|1.7.3a\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Nearside Rear Direction indicator not working \|1.5.1c\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Position lamp switch insecure \|1.1.4b\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	3
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Steering headbearing has excessive free play (2.2.2)	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	2
Fuel cap sealing washer torn \|7.2.2c\|	2
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Front position lamp insecure \|1.1.1c\|	2
Rear Brake lever pivots excessively worn \|3.1.3a\|	2
Brake hose excessively deteriorated	2
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Brake hose damaged	2
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	2
Rear Exhaust excessively deteriorated \|7.1.1a\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Rear Brake lever insecure \|3.1.2a\|	2
Rear Brake lever mounting cracked \|3.1.2c\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Rear position lamp insecure \|1.1.1c\|	2
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Nearside Steering lock stop missing \|2.1.3\|	2
Offside Steering lock stop missing \|2.1.3\|	2
Offside Front Direction indicator damaged and function impaired \|1.5.3a\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Nearside Front Direction indicator insecure \|1.5.3b\|	2
Front Brake excessively binding \|1.2.1 \|f\|\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Stop lamp remains on when the brakes are released	2
Direction indicators not working \|1.5.1c\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front Headlamp missing (4.1.1 (a) (ii))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2

MOT History from tests of petrol KYMCO AGILITYs year 2007

Find us on Facebook