| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 27 |
| Registration plate issues | 20 |
| Headlamp aim out of alignment | 13 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Registration plate lamp issues | 3 |
| Horn not working (7.7 (a)) | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Footrest missing (6.2.12 (a)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Nearside Rear Footrest insecure Pivot pin circlip missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest insecure Pivot pin circlip missing (6.2.12 (a)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted Fitted backwards (6.1.7 (j) (i)) | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Central Rear Brake cylinder excessively corroded and likely to crack Rear brake master cylinder no brake effect. completely seized up |1.1.16 |d| |ii|| | 1 |
| All position lamps not working tail light bulbs out, both |4.2.1 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle sticking (6.2.7 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |