Most common failures | No# failures |
---|
Registration plate issues | 37 |
Rear reflector on motorcycle missing |1.4.1| | 31 |
Horn not working |1.7.3a| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn missing |1.7.1| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp aim out of alignment | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Horn is not a constant note |1.7.3c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Horn missing |1.7.1| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering lock stop ineffective |2.1.3| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake fluid reservoir cap missing |3.2.B1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Horn control not functioning. no visible horn present |1.7.2b| | 1 |
Rear Lower Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear suspension component misaligned |2.4.A.1a| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear suspension bush has excessive free play shock lower bush |2.4.A2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp missing |1.2.3a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp not working Front and rear |4.3.1 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Stop lamp does not illuminate immediately a brake applies via front brake lever |1.3.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Horn missing (1.7.1) | 1 |
Lower Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |