Most common failures | No# failures |
---|
Registration plate issues | 25 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Headlamp aim out of alignment | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Horn missing |1.7.1| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Registration plate lamp issues | 2 |
Headlamp aim not tested |4.1.2 |b|| | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Direction indicator missing |1.5.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Central Rear Lower Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Throttle operating incorrectly jams fully open |6.2.1f| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working works intermitant switch fault. |4.2.1 |a|| | 1 |
Rear Shock absorber has negligible damping effect knocks on rebound. |5.3.2 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Lower Motorcycle structure joining/attachment plate or fastening insecure Side stand , subframe bolt (6.1.1 (b) (i)) | 1 |
Throttle operating incorrectly Sticking (6.2.7 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Direction indicator obviously incorrectly positioned too close together |4.4.3 |a|| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake pedal is inoperative (3.1.3c) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Rear Lower Motorcycle structure joining/attachment plate or fastening insecure Sub frame bolt broken (6.1.1 (b) (i)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |