Most common failures | No# failures |
---|
Registration plate issues | 32 |
Rear reflector on motorcycle missing |1.4.1| | 21 |
Headlamp aim out of alignment | 12 |
Horn not working |1.7.3a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn missing |1.7.1| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Horn not working (7.7 (a)) | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Upper Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear subframe bolt missing |6.2.1h| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Registration plate lamp issues | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Fuel system component leaking from carb` |7.2.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Central Front Steering headbearing has excessive wear or free play head stock bearings affecting steering |2.2.2 |f| |i|| | 1 |
Offside Front Upper Brake cylinder has no reserve travel and braking performance affected Front brake lever contacting handlebar grip |1.1.16 |e| |ii|| | 1 |
Central Front Upper Fuel cap ineffective Fuel cap seal missing |6.1.3 |b| |i|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Fuel cap leaking |6.1.3 |b| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel fractured |5.2.2 |a|| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Shock absorber has a serious fluid leak both |5.3.2 |b|| | 1 |
Horn not working on full rh lock |1.7.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering horn |2.1.2a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Steering lock stop missing (2.1.3) | 1 |
Horn missing (1.7.1) | 1 |
Rear Wheel spoke excessively loose (4.2.1b) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Brake excessively binding Suspect master cylinder seizing (1.2.1 (f)) | 1 |
Headlamp light source and lamp not compatible HID retro fitted (4.1.4 (c)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket so loose it is likely to fail insecure (6.1.7 (c) (ii)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel no reserve (1.1.2 (a)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Nearside Direction indicator not working (1.5.1c) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Horn not working Missing (7.7 (a) (ii)) | 1 |
Horn not working (1.7.3a) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Rear axle adjusting block cracked (5.2.1 (c) (ii)) | 1 |
Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected spindle loose (5.2.1 (c) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |