Most common failures | No# failures |
---|
Registration plate issues | 134 |
Rear reflector on motorcycle missing |1.4.1| | 130 |
Headlamp aim out of alignment | 67 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 44 |
Horn not working |1.7.3a| | 38 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 36 |
Front wheel bearings have excessive free play |2.3.5b| | 36 |
Rear Rear reflector on motorcycle missing |1.4.1| | 34 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 31 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Front wheel bearings are excessively rough |2.3.5b| | 13 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Drive chain worn to excess |6.2.1e| | 12 |
Rear Wheel spoke excessively loose |4.2.1b| | 11 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 10 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Front Front wheel bearings have excessive free play |2.3.5b| | 9 |
Horn missing |1.7.1| | 9 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Drive chain excessively tight |6.2.1d| | 5 |
Direction indicators not working |1.5.1c| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Front Horn not working |1.7.3a| | 4 |
Fuel cap sealing washer missing |7.2.2c| | 4 |
Registration plate lamp issues | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp aim not tested (4.1.2 (b)) | 4 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp aim not tested |1.6| | 3 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Rear position lamp incorrect colour |1.1.2b| | 3 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear reflector on motorcycle missing (1.4.1) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
An item not tested |Manual| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Wheel spoke missing |4.2.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Front Wheel spoke cracked. |4.2.1b| | 2 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Offside Rear Direction indicator missing |1.5.1a| | 2 |
Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Handlebar handgrip missing |2.1.1c| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Horn not working (7.7 (a)) | 2 |