Most common failures | No# failures |
---|
Registration plate issues | 23 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Headlamp aim out of alignment | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Registration plate lamp issues | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Offside Fork yoke fractured |2.2.2 |d| |i|| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Wheel more than one fixing loose Wheel bearing has excess sideways movement. (5.2.1 (a) (ii)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Brake pedal has inadequate reserve travel strikes frame |3.1.3b| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Stop lamp not working control |4.3.1 |a| |ii|| | 1 |
All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp insecure incorrectly fitted |1.2.3b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp missing (4.3.1 (a) (ii)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Switch not working |1.3.1a| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Horn control defective |1.7.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Brake performance not tested |3.3| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Upper Fork yoke fractured (2.2.2 (d) (i)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing rough when rotated and play also |5.1.3 |b| |i|| | 1 |