Most common failures | No# failures |
---|
Registration plate issues | 16 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Horn not working |1.7.3a| | 5 |
Headlamp aim out of alignment | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Registration plate lamp issues | 2 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
Rear Stop lamp not working when side lights or headlamp switched on |4.3.1 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front position lamp does not illuminate immediately when switched on (1.1.3a) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Horn missing (1.7.1) | 1 |
Rear Wheel spoke excessively loose (4.2.1b) | 1 |
Headlamp aim not tested (1.6) | 1 |
Nearside Upper An item not tested (Manual) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake locking device missing pads |3.2.A1e| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Suspension component pin or bush excessively worn swinging arm |5.3.4 |a| |i|| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Rear reflector on motorcycle incorrectly positioned Not fitted on centreline |1.4.2d| | 1 |