Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 28 |
Registration plate issues | 18 |
Headlamp aim out of alignment | 11 |
Horn not working |1.7.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working (7.7 (a) (ii)) | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Horn missing |1.7.1| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Drive chain excessively loose |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp not working FRONT AND REAR BRAKE LAMPS NOT WORKING (4.3.1 (a) (ii)) | 1 |
Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake switch missing |1.3.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Horn not working (7.7 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies Front brake switch |1.3.1a| | 1 |
Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Rear Rear suspension bush has excessive free play swingarm bushes have excssive play |2.4.A2a|i|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Horn not working (1.7.3a) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Front wheel bearings are excessively rough (2.3.5b) | 1 |
Rear wheel spindle loose (2.4.A.2b) | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Registration plate lamp issues | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |