Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 33 |
Registration plate issues | 25 |
Headlamp aim out of alignment | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Horn not working |1.7.3a| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn missing |1.7.1| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp remains on when the brake is released brake |1.3.1e| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired beams working in reverse |1.2.3a| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Central Horn control defective |1.7.2a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Horn control defective |1.7.2a| | 1 |
Shock absorber has a serious fluid leak Front (5.3.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke excessively loose 3x spokes loose (5.2.2 (d)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Central Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Registration plate lamp issues | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Horn is not a constant note |1.7.3c| | 1 |