Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 48 |
Registration plate issues | 42 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 20 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Headlamp aim out of alignment | 17 |
Horn not working |1.7.3a| | 16 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 14 |
Front wheel bearings have excessive free play |2.3.5b| | 10 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Headlamp insecure |1.2.3b| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector on motorcycle missing (1.4.1) | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Rear Upper Motorcycle structure cracked |6.1.1a| | 1 |
Offside Rear Upper Motorcycle structure cracked |6.1.1a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Wheel spoke missing |4.2.1b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Outer Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect both front (5.3.2 (b)) | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Indicator tell tale not operating correctly |1.5.2| | 1 |
Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on no tail light |1.1.3a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Horn missing |1.7.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front wheel bearings have excessive free play front |2.3.5b| | 1 |
Stop lamp remains on when the brake is released front |1.3.1e| | 1 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Fuel cap ineffective fuel cap seal missing |6.1.3 |b| |i|| | 1 |
Drive chain sprocket worn to excess rear |6.2.1e| | 1 |
Drive chain sprocket worn to excess front |6.2.1e| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Upper Front suspension assembly component loose |2.3.1| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on not working |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies not working on either brake |1.3.1a| | 1 |
Front wheel bearings have excessive free play large amount of movement on front wheel spindle |2.3.5b| | 1 |