| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 29 |
| Rear reflector on motorcycle missing |1.4.1| | 27 |
| Registration plate issues | 19 |
| Registration plate lamp issues | 9 |
| Rear reflector missing (4.8.2 (a) (ii)) | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Centre Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Exhaust has part of the system missing |7.1.1a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Horn not working |1.7.3a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Brake back plate|s| insecure |3.2.A1j| | 1 |
| Offside Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Central Rear Rear position lamp insecure |1.1.1c| | 1 |
| Front All direction indicators obviously incorrectly positioned less the 240mm space between light units (4.4.3 (a)) | 1 |
| Rear All direction indicators obviously incorrectly positioned less than 180mm between light units (4.4.3 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Fuel cap ineffective unable to open both fuel caps to check seals (6.1.3 (b) (i)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear reflector on motorcycle insecure |1.4.2c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Central Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Central Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
| Brake component inadequately mounted front brake hose rubbing on wheel (1.1.21 (c)) | 1 |
| Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Wheel excessively distorted 5mm off distortion (5.2.2 (c) (i)) | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Brake lever excessively chafed |3.2.A1a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Offside Indicator switch insecure |1.5.4| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Offside Front Brake disc significantly and obviously worn Front disc bent (1.1.14 (a) (i)) | 1 |
| Rear Brake has no recorded effort at a wheel Rear brake does not work correctly (1.2.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp not working FRONT CONTROL (4.3.1 (a) (ii)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake light does not work |1.3.1a| | 1 |
| Front shock absorber seal failed and leaking oil front off side fork seal leaking |2.3.3| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |