Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 50 |
Headlamp aim out of alignment | 45 |
Registration plate issues | 38 |
Rear reflector missing (4.8.2 (a) (ii)) | 19 |
Registration plate lamp issues | 13 |
Rear reflector missing |4.8.2 |a| |ii|| | 11 |
Horn not working |1.7.3a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working (7.7 (a) (ii)) | 5 |
Horn not working |7.7 |a| |ii|| | 5 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Horn not working (7.7 (a)) | 4 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
Front Brake fluid contaminated (1.8 (a)) | 2 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Exhaust has part of the system missing Baffle |7.1.1a| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Footrest missing Both Pillion (6.2.12 (a)) | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp not working front brake operated. (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Stop lamp not working brake (4.3.1 (a) (ii)) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Brake lever pivot has excessive free play |1.1.1 |b|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake component modification unsafe modified rear master cylinder reservoir lid unsafe (1.1.21 (d) (i)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Central Front Upper Horn control not functioning. repaired horn wire at station. |1.7.2b| | 1 |
Wheel fixing missing (single fixing) front wheel nut missing (5.2.1 (a) (ii)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on low beam not working |1.1.3a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |