Most common failures | No# failures |
---|
Registration plate issues | 66 |
Rear reflector on motorcycle missing |1.4.1| | 59 |
Headlamp aim out of alignment | 26 |
Horn not working |1.7.3a| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn missing |1.7.1| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working (1.7.3a) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Horn not working (7.7 (a)) | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Horn sound not in accordance with requirements missing . (7.7 (c)) | 1 |
Vehicle identification number not legible frame has been powder coated , clean frame to read number (0.2 (b)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bush has excessive free play lower shock bush |2.4.A2a|i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear All position lamps not working |4.2.1 |a|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear suspension bearing has excessive free play (2.4.A2a(i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Suspension arm fractured (5.3.3 (b) (ii)) | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear Lower Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp ns front indicator operates as well |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear An item not tested |Manual| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Stop lamp does not illuminate immediately a brake applies control 1 |1.3.1a| | 1 |
Stop lamp not working control 1 (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |