| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 29 |
| Registration plate issues | 23 |
| Headlamp aim out of alignment | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
| Horn not working |1.7.3a| | 13 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Registration plate lamp issues | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Wheel spoke excessively loose |5.2.2 |d|| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Offside Front Horn not working wireing in switch and loom |7.7 |a| |ii|| | 1 |
| Nearside Front Brake caliper damaged and braking performance affected new bushings |1.1.16 |a| |ii|| | 1 |
| Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Nearside Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected broken in two |5.2.1 |c| |ii|| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| All position lamps not working all wiring repaired loom required |4.2.1 |a|| | 1 |
| Central Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Central Rear Wheel bearing so rough it is likely to overheat or break up all replaced,, u/s |5.1.3 |b| |ii|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Stop lamp affected by the operation of another lamp does not work with lights on |1.3.2| | 1 |
| Rear Stop lamp affected by the operation of another lamp does not work with lights on |1.3.2| | 1 |
| Headlamp aim headlamp damaged and function impaired hi/low reversed |1.2.3a| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Horn missing |1.7.1| | 1 |
| Brake performance not tested |3.3| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working of footbrake (4.3.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |