| Most common failures | No# failures |
|---|
| Registration plate issues | 19 |
| Stop lamp remains on when the brakes are released | 11 |
| Rear reflector missing (4.8.2 (a) (ii)) | 11 |
| Horn not working (7.7 (a) (ii)) | 10 |
| Registration plate lamp issues | 7 |
| Headlamp aim out of alignment | 5 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Horn not working (7.7 (a)) | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Wheel spoke missing (5.2.2 (d)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Suspension component has excessive wear or free play swing arm |5.3.3 |d|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Front Stop lamp not working With front brake. |4.3.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
| Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Brake disc significantly and obviously worn badly worn (1.1.14 (a) (i)) | 1 |