| Most common failures | No# failures |
|---|
| Registration plate issues | 51 |
| Rear reflector on motorcycle missing |1.4.1| | 27 |
| Horn not working |1.7.3a| | 20 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 19 |
| Headlamp aim out of alignment | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Horn missing |1.7.1| | 5 |
| Horn not working (7.7 (a)) | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Registration plate lamp issues | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Lower Horn not working |1.7.3a| | 1 |
| Front shock absorber seal failed and leaking oil left hand leg |2.3.3| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Front Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Central Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Central Front Lower Wheel bearing has excessive play Front Wheel Bearing Has Play (5.1.3 (a) (i)) | 1 |
| Central Front Lower Wheel bearing rough when rotated Front Wheel is Rough When Turned (5.1.3 (b) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Brake performance not tested |3.3| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Lower Horn not working |1.7.3a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Rear Wheel spoke excessively loose one |4.2.1b| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Stop lamp not working Front brake and rear brake not working (4.3.1 (a) (ii)) | 1 |
| Suspension arm pin or bush excessively worn Lower shocker to swing arm excessive play (5.3.4 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |