Most common failures | No# failures |
---|
Registration plate issues | 17 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Horn not working |1.7.3a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Horn missing |1.7.1| | 4 |
Headlamp aim out of alignment | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake performance not tested |3.3| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Stop lamp does not emit a steady light Front rear |1.3.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Rear Motorcycle structure cracked triangulation for seat |6.1.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp not working Both front and rear levers (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp missing |1.2.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |