| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 37 |
| Registration plate issues | 34 |
| Headlamp aim out of alignment | 21 |
| Horn not working |1.7.3a| | 12 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Horn not working (7.7 (a)) | 4 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 2 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Horn missing |1.7.1| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Front Horn missing |1.7.1| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Wheel bearing has excessive play REAR |5.1.3 |a| |i|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Central Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Headlamp aim not tested headlamp aim not tested due to insecure headlamp (4.1.2 (b)) | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Steering operation impeded by a fairing mudguard fouling exhaust guard |2.1.4 |e|| | 1 |
| Rear Suspension component ball joint excessively worn play in lower rear shock |5.3.4 |a| |i|| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Suspension arm attachment bracket/mounting insecure PIVOT NUT MISSING (5.3.3 (a) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Horn missing (1.7.1) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear Wheel spoke cracked. |4.2.1b| | 1 |
| Front shock absorber seal failed and leaking oil o/s and n/s |2.3.3| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Wheel fractured significantly reducing the original strength Hub |4.2.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Direction indicator missing All missing |1.5.1a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Front wheel bearings are excessively rough (2.3.5b) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls pedal (4.3.2 (a) (iii)) | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Rear Brake lagging in operation Brake applies 25% and excess force does not increase brake efficiency. (1.2.1 (d)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |