| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 88 |
| Rear reflector missing (4.8.2 (a) (ii)) | 51 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 44 |
| Headlamp aim out of alignment | 44 |
| Registration plate issues | 42 |
| Drive chain excessively loose |6.2.1d| | 27 |
| Rear reflector missing |4.8.2 |a| |ii|| | 23 |
| Registration plate lamp issues | 22 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 20 |
| Steering headbearing has excessive free play |2.2.2| | 19 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 15 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 13 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 13 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 13 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Drive chain worn to excess |6.2.1e| | 11 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Rear Brake excessively binding (1.2.1 (f)) | 11 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 11 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 10 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 9 |
| Rear Brake excessively binding |1.2.1 |f|| | 9 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 9 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
| Nearside Rear Direction indicators not working |1.5.1c| | 8 |
| Stop lamp remains on when the brakes are released | 8 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 7 |
| Horn not working |1.7.3a| | 7 |
| Offside Rear Direction indicators not working |1.5.1c| | 7 |
| Horn not working (7.7 (a) (ii)) | 7 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 7 |
| Front Brake excessively binding (1.2.1 (f)) | 7 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 6 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 6 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 6 |
| Offside Rear Footrest missing (6.2.12 (a)) | 6 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 5 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 5 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 5 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 5 |
| Exhaust system insecure (6.1.2 (a)) | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Offside Front Direction indicators not working |1.5.1c| | 4 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Footrest missing (6.2.12 (a)) | 4 |
| Front Position lamp not working (4.2.1 (a)) | 4 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 4 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 4 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| All direction indicators not working (4.4.1 (a) (ii)) | 4 |
| Horn not working (7.7 (a)) | 4 |
| Rear Footrest missing |6.2.1a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Nearside Steering lock stop missing |2.1.3| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Headlamp aim not tested |4.1.2 |b|| | 3 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Footrest missing |6.2.12 |a|| | 3 |
| Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 3 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 3 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Footrest missing both |6.2.1a| | 2 |
| Rear Brake pedal insecure |3.1.2a| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
| Central Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front shock absorber seal failed and leaking oil L/H |2.3.3| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Drive chain fouling another component |6.2.1d| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 2 |
| All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
| Horn sound not in accordance with requirements (7.7 (c)) | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |