| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 29 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 15 |
| Drive chain excessively loose |6.2.1d| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 13 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Drive chain excessively tight |6.2.1d| | 7 |
| Headlamp insecure |1.2.3b| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Riders seat insecure |6.2.1a| | 6 |
| Front Wheel spoke excessively loose |4.2.1b| | 5 |
| Horn not working |1.7.3a| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Rear Wheel spoke excessively loose |4.2.1b| | 5 |
| Registration plate issues | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Indicator tell tale not functioning |1.5.2| | 3 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear suspension component seized |2.4A2a|ii|| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Front position lamp insecure |1.1.1c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Upper Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Wheel spoke missing |4.2.1b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Chain guard fouling another component |6.2.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Brake hose excessively deteriorated | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Brake hose damaged | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Chain guard insecure |6.2.1c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Lower Rear mono-shock insecure |2.4.B.4| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Upper Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear brake caliper securing device missing |3.5.1j| | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| An item not tested |Manual| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Centre Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Centre Rear Stop lamp not working |1.2.1b| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Brake component leaking fluid |3.2.B4| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Rear suspension component excessively bent |2.4.A.1a| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Stop lamp insecure |1.3.3b| | 1 |
| Brake locking device missing torque arm |3.2.A1e| | 1 |
| Rear suspension bush has excessive free play Suspect swing arm bolt loose |2.4.A2a|i|| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp Switch broken |1.2.2b|i|| | 1 |
| Indicator switch defective Broken |1.5.4| | 1 |
| Rear Brake pedal has inadequate reserve travel Brake inoperative |3.1.3b| | 1 |
| Rear Brake reaction bracket insecure Split pin missing from torque arm |rear| |3.2.A1j| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Clutch lever positioned so it cannot be readily operated. DOES NOT RELEASE |6.2.1g| | 1 |
| Front suspension assembly component loose HEAD STOCK MISSING COMPONENT |2.3.1| | 1 |
| Steering lock stop loose |2.1.3| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Fuel system component insecure TANK |7.2.1b| | 1 |
| Rear shock absorber has inadequate damping effect. Both |2.4.A.3b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Position lamp switch does not illuminate all position lamps with a single operation (4.2.2 (a)) | 1 |