Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Indicator switch defective |1.5.4| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Registration plate issues | 2 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Drive chain excessively loose |6.2.1d| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Footrest missing |6.2.1a| | 1 |
Stop lamp not working front brake stop light |4.3.1 |a| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Nearside Rear Upper Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Upper Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases exhaust rotten |6.1.2 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Riders seat with a defective supporting structure rear mudguard assembly loose |seat support| |6.2.5 |a| |i|| | 1 |
Footrest missing both pillion footrests |6.2.12 |a|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Direction indicator missing all four |1.5.1a| | 1 |
Stop lamp affected by the operation of another lamp bulb incorrectly fitted |1.3.2| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake drum insecure (1.1.14 (a) (ii)) | 1 |
Steering headbearing has excessive free play (2.2.2) | 1 |
Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Registration plate lamp issues | 1 |
Brake lever cannot be applied smoothly very hard to pull |3.1.3d| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Footrest missing both sides |6.2.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies not working on both controls |1.3.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Chain guard insecure |6.2.1c| | 1 |
Direction indicators not working All indicators not working... Replaced flasher relay now fixed.. |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Direction indicators not working left switch not staying on |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Direction indicator insecure rear left |1.5.3b| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
All direction indicators not working fault in all 4 |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator likely to become detached insecure |4.4.1 |c| |ii|| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar Switch grip is loose. (2.2.1 (d) (ii)) | 1 |
Rear All direction indicators obviously incorrectly positioned lights are to close. (4.4.3 (a)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear Stop lamp remains on when the brake is released Adjusted |1.3.1e| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Offside Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake light switch |1.3.1a| | 1 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators affected by the operation of another lamp all indicator do not work when no lights are on |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp indicators all work when lights are on |1.5.1c| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced rear subframe insecure (6.1.1 (b) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |