Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Drive chain excessively loose |6.2.1d| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 8 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Direction indicators not working |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Indicator tell tale not functioning |1.5.2| | 2 |
Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Handlebar deformed |2.1.1b| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Footrest insecure |6.2.12 |a|| | 1 |
Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Nearside Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Rear Brake caliper operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Stop lamp light intensity significantly reduced bulb incorrectly fitted |4.3.3 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear suspension bush has excessive free play swingarm bushes. |2.4.A2a|i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Not working |1.3.1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Sprocket lock tabs |6.2.1h| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Registration plate issues | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Engine mount |6.1.1c| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear suspension component excessively corroded. swing arm |2.4.A.1a| | 1 |
Rear wheel spindle securing nut locking device insecure nearside wheel spindle adjuster bolt insecure |2.4.A.2b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Centre Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear suspension component excessively corroded. swingarm |2.4.A.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Upper Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |