>

MOT History from tests of petrol KAWASAKI ZXR750s year 1993

Review the list of common KAWASAKI ZXR750 failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history
Pass percent:75.80%
(The average a petrol KAWASAKI ZXR750 year 1993 passes without issue)
Based on:1,760 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment74
Registration plate issues49
Rear reflector on motorcycle missing |1.4.1|32
Nearside Front shock absorber seal failed and leaking oil |2.3.3|21
Drive chain excessively loose |6.2.1d|19
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|19
Offside Front shock absorber seal failed and leaking oil |2.3.3|18
Front Roller brake test indicates a binding brake |3.3.A1a|17
Registration plate lamp issues14
Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Horn not working |1.7.3a|11
Rear Rear reflector on motorcycle missing |1.4.1|10
Throttle operating incorrectly |6.2.1f|9
Exhaust is leaking and excessively noisey |7.1.1b|9
Rear Roller brake test indicates a binding brake |3.3.A1a|9
Front wheel bearings have excessive free play |2.3.5b|9
Front shock absorber seal failed and leaking oil |2.3.3|9
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Drive chain excessively tight |6.2.1d|8
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|8
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||8
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|8
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|7
Rear Brake pedal has inadequate reserve travel |3.1.3b|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|6
Front wheel bearings are excessively rough |2.3.5b|6
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Offside Rear Direction indicator not working |1.5.1c|5
Steering headbearing has excessive free play |2.2.2|5
Steering movement excessively `notchy` with the wheel raised |2.2.1b|5
Drive chain worn to excess |6.2.1e|5
Drive chain sprocket carrier worn to excess |6.2.1e|5
Front Brake lever cannot be applied smoothly |3.1.3d|5
Exhaust markings indicating not for road use or similar wording |7.1.4|5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))5
Nearside Front Direction indicator insecure |1.5.3b|4
Offside Front Direction indicator not working |1.5.1c|4
Offside Rear Direction indicators not working |1.5.1c|4
Headlamp aim beam image kick up to the offside |1.6|4
Rear Drive chain sprocket worn to excess |6.2.1e|4
Front Front wheel bearings have excessive free play |2.3.5b|4
Rear Hydraulic brake control feels spongy |3.1.4a|4
Rear suspension bearing has excessive free play |2.4.A2a|i||4
Offside Front Direction indicator insecure |1.5.3b|4
Offside Front Direction indicator incorrect colour |1.5.1b|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Horn not loud enough to be heard by another road user |1.7.3a|4
Front Front shock absorber seal failed and leaking oil |2.3.3|4
Nearside Rear Direction indicator not working |1.5.1c|3
Nearside Rear Footrest missing |6.2.1a|3
Offside Rear Footrest missing |6.2.1a|3
Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Nearside Steering lock stop ineffective |2.1.3|3
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|3
Rear Drive chain excessively tight |6.2.1d|3
Rear wheel spindle securing nut locking device missing |2.4.A.2b|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Nearside Front Footrest insecure |6.2.1a|3
Rear suspension bush has excessive free play |2.4.A2a|i||3
Front Steering headbearing has excessive free play |2.2.2|3
Rear Brake locking device missing |3.2.A1e|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Front Brake disc|s| has excessive run out |3.2.A1m|3
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Offside Front Direction indicators not working |1.5.1c|3
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|3
Nearside Front Direction indicator incorrect colour |1.5.1b|3
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|3
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|3
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Nearside Front Direction indicator not working |1.5.1c|2
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Direction indicator not working |1.5.1c|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Rear Floor brake test indicates a sticking brake |3.3.C2c|2
Indicator tell tale not functioning |1.5.2|2
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Handlebar handgrip not secure to handlebars. |2.1.1c|2
Brake hose excessively deteriorated2
Offside Footrest insecure |6.2.1a|2
Front Direction indicator missing |1.5.1a|2
Horn is not a constant note |1.7.3c|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Direction indicators flashing less than 60 times a minute |1.5.1c|2
Riders seat insecure |6.2.1a|2
Nearside Direction indicator not working |1.5.1c|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Front Drive chain sprocket worn to excess |6.2.1e|2
Front Wheel has an excessively distorted bead rim. |4.2.2|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Front Horn not working |1.7.3a|2
Centre Rear reflector on motorcycle missing |1.4.1|2
Offside Headlamp aim beam image kick up to the offside |1.6|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Rear Brake reaction bracket insecure |3.2.A1j|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Offside Front Roller brake test indicates a binding brake |3.3.A1a|2
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Brake lever insecure |3.1.2a|2
Rear mono-shock pivot excessively worn |2.4.B.4|2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Brake locking device missing |3.2.A1e|2
Lower Rear suspension bush has excessive free play |2.4.A2a|i||2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Front Roller brake test indicates a severely juddering brake |3.3.A1b|2
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Offside Steering lock stop ineffective |2.1.3|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Direction indicators not working |1.5.1c|2
Rear Brake disc|s| has excessive run out |3.2.A1m|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Nearside Footrest insecure |6.2.1a|2
Offside Front Handlebar deformed |2.1.1b|2
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Nearside Headlamp insecure |1.2.3b|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Brake excessively binding (1.2.1 (f))2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy