Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Registration plate issues | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate lamp issues | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Position lamp switch faulty |1.1.4a| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Brake pipe excessively corroded | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Upper Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Nearside Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working Brake light switch. (4.3.1 (a) (ii)) | 1 |
Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Centre Rear Drive chain excessively loose |6.2.1d| | 1 |
Throttle operating incorrectly sticking open slightly on rh lock (6.2.7 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |