Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Registration plate issues | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Drive chain excessively loose |6.2.1d| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Headlamp switch faulty |1.2.4| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front suspension assembly component cracked |2.3.1| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Exhaust mounting does not fully support the exhaust system silencer insecure |7.1.1.c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Front shock absorber seal failed and leaking oil Both |2.3.3| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Headlamp incorrect colour (4.1.4 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |