Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 14 |
Headlamp aim out of alignment | 6 |
Registration plate issues | 5 |
Horn not working |1.7.3a| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp not working With rear brake. |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak R/H |5.3.2 |b|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Nearside Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Offside Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Central Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Central Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Motorcycle structure excessively damaged o/s foot rest |6.1.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Offside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |