Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 60 |
Registration plate issues | 49 |
Headlamp aim out of alignment | 18 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate lamp issues | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Horn not working |1.7.3a| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Horn not working |1.7.3a| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Rear Brake pedal mounting cracked . |3.1.2c| | 2 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Offside Rear Direction indicator missing |1.5.1a| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Gradient brake test indicates a severely juddering brake |3.3.D1d| | 1 |
Gradient brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.D1b| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
An item not tested |Manual| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Offside Front Brake lever is inoperative |3.1.3c| | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Offside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Central Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Central Rear Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake component is fractured |3.1.5| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front position lamp incorrect colour both lamps green |1.1.2a| | 1 |
Steering control handlebar movement restricted by trapped cables on right lock |2.1.2c| | 1 |
Footrest missing nearside pillion foot rest |6.2.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Horn control defective |1.7.2a| | 1 |
Direction indicators affected by the operation of another lamp Rear |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Brake pedal mounting cracked . |3.1.2c| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Split pin (5.2.1 (c) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Upper Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Central Front Horn not working (7.7 (a) (ii)) | 1 |
Central Rear Brake excessively binding (1.2.1 (f)) | 1 |
Central Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Nearside Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Nearside Front Lower Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |