| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Headlamp aim out of alignment | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Registration plate issues | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear wheel spindle securing nut locking device insecure locking pin missing. |2.4.A.2b| | 1 |
| Front Lower Fuel tank leaking |7.2.1a| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Registration plate lamp issues | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure o/s chain adjuster insecure |5.3.3 |a| |i|| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake hose leaking (1.1.12 (c)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |