MOT History from tests of petrol KAWASAKI ZX-9Rs year 1994

Review the list of common KAWASAKI ZX-9R failures below or to perform a specific mot history check on your KAWASAKI then use our popular KnowYourCar service

mot history

Pass percent:76.53%

(The average a petrol KAWASAKI ZX-9R year 1994 passes without issue)

Based on:1,704 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	55
Registration plate issues	46
Rear reflector on motorcycle missing \|1.4.1\|	35
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	18
Drive chain excessively loose \|6.2.1d\|	15
Horn not working \|1.7.3a\|	14
Drive chain excessively tight \|6.2.1d\|	13
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Throttle operating incorrectly \|6.2.1f\|	10
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	9
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	9
Registration plate lamp issues	9
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	7
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Floor brake test indicates a binding brake \|3.3.C2c\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	6
Nearside Front Direction indicators not working \|1.5.1c\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Offside Rear Direction indicators not working \|1.5.1c\|	5
Nearside Rear Direction indicator not working \|1.5.1c\|	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Steering headbearing has excessive free play \|2.2.2\|	5
Offside Front Direction indicator insecure \|1.5.3b\|	5
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	5
Rear reflector missing (4.8.2 (a) (ii))	5
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Front Footrest insecure \|6.2.1a\|	4
Front Brake excessively binding (1.2.1 (f))	4
Direction indicators not working \|1.5.1c\|	3
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Rear Brake hose leaking fluid \|3.2.B4\|	3
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	3
Nearside Front Direction indicator insecure \|1.5.3b\|	3
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	3
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Rear mono-shock pivot excessively worn \|2.4.B.4\|	2
Offside Direction indicators not working \|1.5.1c\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Nearside Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front Lower Footrest insecure \|6.2.1a\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Nearside Lower Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Chain guard insecure \|6.2.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Headlamp insecure \|1.2.3b\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Rear Footrest missing \|6.2.1a\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Footrest insecure \|6.2.1a\|	2
Rear Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Offside Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Front suspension assembly component loose \|2.3.1\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	55
Registration plate issues	46
Rear reflector on motorcycle missing \|1.4.1\|	35
Front Roller brake test indicates a binding brake \|3.3.A1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	18
Drive chain excessively loose \|6.2.1d\|	15
Horn not working \|1.7.3a\|	14
Drive chain excessively tight \|6.2.1d\|	13
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	12
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Throttle operating incorrectly \|6.2.1f\|	10
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	9
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	9
Registration plate lamp issues	9
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	7
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Floor brake test indicates a binding brake \|3.3.C2c\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	6
Nearside Front Direction indicators not working \|1.5.1c\|	6
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Front Brake lever has inadequate reserve travel \|3.1.3b\|	5
Offside Rear Direction indicators not working \|1.5.1c\|	5
Nearside Rear Direction indicator not working \|1.5.1c\|	5
Exhaust is leaking and excessively noisey \|7.1.1b\|	5
Steering headbearing has excessive free play \|2.2.2\|	5
Offside Front Direction indicator insecure \|1.5.3b\|	5
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	5
Rear reflector missing (4.8.2 (a) (ii))	5
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Front Footrest insecure \|6.2.1a\|	4
Front Brake excessively binding (1.2.1 (f))	4
Direction indicators not working \|1.5.1c\|	3
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Headlamp aim beam image kick up to the offside \|1.6\|	3
Rear Brake hose leaking fluid \|3.2.B4\|	3
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	3
Nearside Front Direction indicator insecure \|1.5.3b\|	3
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	3
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	2
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Rear mono-shock pivot excessively worn \|2.4.B.4\|	2
Offside Direction indicators not working \|1.5.1c\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Nearside Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Offside Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Front Lower Footrest insecure \|6.2.1a\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Nearside Lower Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Chain guard insecure \|6.2.1c\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Headlamp insecure \|1.2.3b\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	2
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Rear Footrest missing \|6.2.1a\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Footrest insecure \|6.2.1a\|	2
Rear Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Offside Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Front suspension assembly component loose \|2.3.1\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2

MOT History from tests of petrol KAWASAKI ZX-9Rs year 1994

Find us on Facebook