Most common failures | No# failures |
---|
Headlamp aim out of alignment | 59 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Headlamp aim beam image kick up to the offside |1.6| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Registration plate issues | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 3 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake hose which buldges |3.2.B4| | 1 |
Nearside Rear Brake reaction bracket insecure severely corroded |3.2.A1j| | 1 |
Nearside Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Centre Front Lower Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp not working replaced front brake light switch |4.3.1 |a| |ii|| | 1 |
Offside Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
An item not tested |Manual| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Horn not working |1.7.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Brake reaction bracket insecure split pin missing |3.2.A1j| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Stop lamp not working when front brake is applied (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Stop lamp switch with a delay in operation Brake Light Switch Inoperative. (4.3.2 (a) (ii)) | 1 |
Stop lamp not working Front brake aplication. (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
Handlebar grip insecure to handlebar Left (2.2.1 (d) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Sidecar structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Wheel bearing rough when rotated sidecar wheel (5.1.3 (b) (i)) | 1 |
Nearside Wheel bearing has excessive play sidecar wheel bearing (5.1.3 (a) (i)) | 1 |
Sidecar wheel alignment has excessive toe-out (2.4 (b)) | 1 |