Most common failures | No# failures |
---|
Headlamp aim out of alignment | 85 |
Registration plate issues | 49 |
Rear reflector on motorcycle missing |1.4.1| | 33 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
Headlamp aim beam image kick up to the offside |1.6| | 12 |
Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Throttle operating incorrectly |6.2.1f| | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Horn not working |1.7.3a| | 8 |
Nearside Front Direction indicator not working |1.5.1c| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 4 |
Stop lamp remains on when the brakes are released | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 4 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Registration plate lamp issues | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Fuel pipe leaking |7.2.1a| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Rear Brake hose leaking fluid |3.2.B4| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |