Most common failures | No# failures |
---|
Headlamp aim out of alignment | 77 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 34 |
Registration plate issues | 34 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 28 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Drive chain excessively loose |6.2.1d| | 19 |
Horn not working |1.7.3a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Throttle operating incorrectly |6.2.1f| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Hydraulic brake control feels spongy |3.1.4a| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Brake pipe excessively corroded | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Front Front mudguard insecure |2.3.7| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Brake cylinder severely corroded |3.2.B1b| | 2 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Central Front Position lamp not working (4.2.1 (a)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Horn not working (7.7 (a)) | 2 |