Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Horn not working |1.7.3a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Fuel system component insecure tank |7.2.1b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Registration plate issues | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Brake pedal pivots excessively worn |3.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Suspension arm pin or bush excessively worn rear swinging arm bushes (5.3.4 (a) (i)) | 1 |
Offside Front Direction indicators not working (1.5.1c) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Wheel fixing missing (multiple fixings) (5.2.1 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Fuel system component leaking Carburettor (6.1.3 (b) (i)) | 1 |