| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 18 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Registration plate issues | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Headlamp aim not tested (4.1.2 (b)) | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front An item not tested |Manual| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Outer Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| An item not tested |Manual| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Horn not working |1.7.3a| | 1 |
| Lower Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Brake hose damaged | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Central Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition exhaust baffles fitted |7.1.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Central Front Vehicle structure has a fracture which is likely to adversely affect braking or steering below head stock (6.1.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Position lamp not working only work when engine is runing (4.2.1 (a) (ii)) | 1 |
| Rear Brake insecure master cylinder (1.1.21 (c)) | 1 |
| Offside Rear Body component insecure wing (6.2.1 (a) (i)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake rod insecure LOCKING NUT NOT CORRECTLY FITTED (1.1.15 (c)) | 1 |
| Nearside Front Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Central Front Headlamps matched pair are incorrectly positioned should have a pair (4.1.4 (a)) | 1 |
| Central Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Front Headlamps matched pair are incorrectly positioned (4.1.4 (a)) | 1 |
| Offside Front Headlamps matched pair are incorrectly positioned (4.1.4 (a)) | 1 |
| Road wheel more than one fixing loose all rear wheel nuts taper washer is rattling on nut (5.2.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Front Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Offside Front Upper Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |